LOAD-FR
Loads the Field Read terminal executive into a suitable terminal.
Syntax
LOAD-FR
Command Class
Proc.
Comments
Refer to the description of the FIELDREAD command for details on how Field Read operates.
Before you can use LOAD-FR to load the terminal executive, Field Read capability must be set in SSM (field 12 of Define Network Profiles).
Note
After setting the Field Read capability in SSM, you need to log off and on again. The setting only takes effect at logon.
On completing the terminal executive load, Field Read is enabled. You can disable and re-enable it again using the D and E options of FIELDREAD.