JDBC

Enabling Logging

There are two ways in which you can enable JDBC logging:

Note

Logging can also be programmed into a Java application, applet or servlet, so some or all of the logging features described below may also be provided by your application - refer to your application documentation for details.

Six property values may be used to control driver tracing.

logLevel

This controls the level of diagnostic information that will be logged on the client. It must be set to one of the following values:

PANIC
ALERT
WARNING
NOTICE
INFO
DEBUG

The default is NOTICE.

logOptions

This option applies additional tracing information if required; for example, the calling method or thread name. It can be set to one or both of the values METHODS  and THREADS. The default is NONE.

logModules

This option controls which modules are to be traced. It can be set to any combination of the following values:

SERVER
DDA
CONNECTION
DATABASEMETADATA
STATEMENT
PREPAREDSTATEMENT
CALLABLESTATEMENT
RESULTSETMETADATA
RESULTSET
ALLMODS

The default is NONE.

hostOption

This controls the type of diagnostic information that will be logged on the host. It can be set to any of the following values:

0  = None
1  = Log input
2  = Log output
3  = Log input and output

hostItemName

This specifies the name of item created in the host logging file. The default cycles through 1 to 9.

Note

When combining values, you must use a vertical bar (|) as a separator; for example:

logOptions=METHODS|THREADS

Client log output is normally displayed on the screen. Your application may provide a way to route the log to a file.

Host log output is saved in the file SQLSRVLOG in the account that the server id logged on to.

Property File

The JDBC driver's property file is called realsql.properties and can be found in the subdirectory com/northgateis/reality/realsql in the directory where you installed the JDBC driver.

Within the realsql.properties file, properties are set by specifying the name of the property, followed by an equals sign and the required value. One property must appear on each line. For example:

logLevel=ALERT
logOptions=
logModules=STATEMENT|RESULTSET
hostOption=2

Using the System Properties to Configure Logging

System properties are set from the command line when calling a java application, by using the -D option. For example:

java myapp -Dcom.northgateis.reality.realsql.logModules=ALLMODS

This example sets the default logging level on all modules from the system properties:

Example Log Output

In the following example, the following property value have been set:

logLevel=DEBUG
logOptions=METHODS
logModules=DRIVER|CONNECTION

The example below shows the information displayed on the screen when selecting all the rows in an SQL table called emp. Note that the log output is interspersed with the normal screen display.

DriverManager.initialize: jdbc.drivers = null
JDBC DriverManager initialized
registerDriver: driver[className=com.northgateis.reality.realsql.RealSQLDriver,com.northgateis.reality.realsql.RealSQLDriver @b2990e61
DriverManager.getConnection("jdbc:realsql://magpie:1203/R82A")
    trying driver[className=com.northgateis.reality.realsql.RealSQLDriver,com.northgateis.reality.realsql.RealSQLDriver @b2990e61]
NOTICE com.northgateis.reality.realsql.RealSQLConnection.RealSQLConnection(): Assigned logging level of 0x40120
NOTICE com.northgateis.reality.realsql.RealSQLConnection.connection():Creating connection to magpie:1203/R82A user=ajt
NOTICE com.northgateis.reality.realsql.RealSQLConnection.isClosed(): false
NOTICE com.northgateis.reality.realsql.RealSQLConnection.setCatalog(): Catalog name "R82A"
NOTICE com.northgateis.reality.realsql.RealSQLConnection.RealSQLConnection():Starting thread for database connection.
NOTICE com.northgateis.reality.realsql.RealSQLConnection.createStatement():ResultSet.TYPE_FORWARD_ONLY, ResultSet.CONCUR_READ_ONLY.
NOTICE com.northgateis.reality.realsql.RealSQLConnection.isClosed(): false
NOTICE com.northgateis.reality.realsql.RealSQLConnection.createStatement():type = 1003, concur = 1007
NOTICE com.northgateis.reality.realsql.RealSQLConnection.isClosed(): false
executeQuery(SELECT * FROM EMP) Ok!
EMPNO...... ENAME..... TITLE.... MGR........ HIREDATE.. SAL...... COMM..... DEPTNO.....
8698        ARCHER     MANAGER   8839        1982-12-22 3750.00             90030      
8788        KELLY      ANALYST   8566        1984-07-31 3900.00             90020      
8369        CALLAGHAN  CLERK     8902        1982-08-09 1700.00             90020      
8499        HARRIS     SALESREP  8698        1982-10-13 2500.00   300.00    90030      
8839        JENSEN     PRESIDENT             1983-07-10 5900.00             90010      
8900        CUTLER     CLERK     8698        1983-07-26 1850.00             90030      
8521        TAYLOR     SALESREP  8698        1982-10-15 2190.00   500.00    90030      
8671        THOMAS     SECRETARY 8839        1984-02-15 1950.00             90010      
8782        WILSON     MANAGER   8839        1983-01-30 3350.00             90010      
8902        OLSEN      ANALYST   8566        1983-07-26 3900.00             90020      
8654        MCBRIDE    SALESREP  8698        1983-05-21 2150.00   1400.00   90030      
8844        HERMAN     SALESREP  8698        1983-05-01 2400.00             90030      
8934        DOUGLAS    CLERK     8782        1983-09-15 2200.00             90010      
8566        CUSTER     MANAGER   8839        1982-11-22 3875.00             90020      
8876        CROSS      CLERK     8788        1984-09-03 2000.00             90020      
15 Rows listed.
NOTICE com.northgateis.reality.realsql.RealSQLConnection.clean(): Number of open statements 1
DEBUG com.northgateis.reality.realsql.RealSQLConnection.clean(): Cleaned 1 statements.
NOTICE com.northgateis.reality.realsql.RealSQLConnection.close(): Closing connection to null/null